New Products 1/9/19 Featuring Adafruit #GrandCentral #M4 Express! @adafruit #adafruit

Browse through all that’s new here!

NEW PRODUCTS THIS WEEK

Particle Argon – nRF52840 with BLE, Mesh and WiFi:
Woohoo, it’s time for a Particle Mesh party! And the Particle Argon is bringing it with a mix of Bluetooth Low Energy, Mesh networking and and Wi-Fi, your two most favorite 2.4GHz wireless protocols. The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840, the BLE Cortex M4 with a ton of Flash, RAM and peripherals, including native USB support. see more!

Particle Boron LTE – nRF52840 with BLE, Mesh, LTE Cellular Modem: Like all Particle Mesh boards, it even has built-in battery charging circuitry so it’s easy to connect a Li-Poly battery (not included but we stock lots here at the ‘fruit) and deploy your local network in minutes. The Boron is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints where Wi-Fi is missing or unreliable.

Please Note: Particle’s MVNO will provide support for LTE M1 connectivity in the US upon initial release. See the cellular FAQ for details. See more!

Particle Xenon – nRF52840 with BLE and Mesh: Particle Xenon is the most basic element (ha!) for your mesh network. The Xenon is a low-cost mesh-enabled development board that can act as either a standalone endpoint or repeater for Particle Mesh networks . It is based on the Nordic nRF52840, the BLE Cortex M4 with a ton of Flash, RAM and peripherals, including native USB support. See more!

Particle Mesh LTE Bundle – Full Starter Kit: The bundle comes with three mesh-ready boards: the Boron LTE, a Particle Mesh board with built in LTE cellular modem, and two Xenons, the end points or network repeaters, so you can start to experiment with a multi-device Particle Mesh network. The Boron LTE is a powerful LTE CAT-M1/NB1 enabled development kit that can act as either a standalone cellular endpoint or LTE enabled gateway for Particle Mesh networks See more!

Particle Xenon Kit – nRF52840 with BLE and Mesh: This product not only with a fully-assembled Xenon dev board, it even has some starting-out-parts so you can hit the ground running with all the hardware accessories you need. See more!

Particle Boron 2G/3G Kit – nRF52840 with BLE, Mesh and Cellular: why not cater for connectivity with the Particle Mesh 2G/3G Cellular, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and connect to the Internet through a Particle gateway. See more!

Pycom Pyscan – RFID NFC, Battery and Sensor Add-On for Pycom: Pyscan is a sensor shield you can use with any of your Pycom multi-network development boards! Featuring an accelerometer, ambient light sensor and RFID – an NFC/RFID antenna is included with purchase

Plug in any of your Pycom board into the sockets and add sensors to your node, there’s drivers for all of them so its easy to start. See more!

pyboard Color LCD Skin with Resistive Touch – LCD160CR v1.1: The color LCD skin is a module that fits right onto the pyboard. It provides a 160×128 pixel, 16-bit graphical LCD display with backlight, as well as a resistive touch sensor covering the entire screen.

The screen has 160×128 pixels of 16-bit color, has a backlight with a software-controllable intensity, and a resistive touch sensor which can detect a single force-based touch anywhere on the screen. The display has a custom controller which accepts serial commands via its I2C and UART interfaces, and SPI for receiving raw data. See more!

AdaBox010 – Rainbow Trellis: This ADABOX is a multi-sensory feast – Lights! Sound! Squishy buttons! This box comes with a NeoTrellis M4. It’s a grid of 4×8 silicone buttons, with a NeoPixel behind each one for rainbow glory. The engine is a ATSAMD51 microcontroller with stereo audio channels and microphone input. See more!

JST PH 3-pin Plug to Color Coded Alligator Clips Cable: This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We’re carrying these to match up with any of our boards or breakouts with 3-pin ‘STEMMA’ connectors on them such as the HalloWing or NeoTrellis M4. See more!

JST PH 4-pin Plug to Color Coded Alligator Clips Cable: This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We’re carrying these to match up with any of our boards or breakouts with ‘STEMMA’ connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA breakouts! See more!

JST PH 4-Pin Socket to Color Coded Cable – 200mm: This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! See more!

: This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. See more!

Pimoroni Picade Console Controller Kit – PIM407: Power-up your TV with a Pimoroni Picade Console Controller! It’s a compact, Raspberry Pi-powered retro games machine with authentic arcade controls that plugs right into your TV, monitor, or other HDMI display. It’s a stylish, retro, and fun arcade controller for your Raspberry Pi! See more!

Assembled Adafruit Feather M0 WiFi with Stacking Headers: Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast & easy to use in comparison to other WiFi modules we’ve used in the past. See more!

Adafruit Grand Central M4 Express featuring the SAMD51: We’re selling out fast but making more all the time! Sign up to be notified when it’s in the store!

Are you ready? Really ready? Cause here comes the Adafruit Grand Central featuring the Microchip ATSAMD51. This dev board is so big, it’s not named after a Metro train, it’s a whole freakin’ station!

This board is like a freight train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. See more!

Stay in the loop at Adafruit.com/New!

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter